How to Replace a Nissan Juke Spare Key
Nissan Juke is an attractive and fun hatchback that features a unique engine configuration. It can be a bit noisy, but it's enjoyable to drive.
The battery that powers the key fob on the Nissan Juke has to be replaced every two years or more, or if the battery is low. nissan key replacement prices can do it yourself, but you will need some tools.
Dead Coin Battery
If your Nissan Juke key fob isn't working the first thing you need to examine is the battery inside. It may be dead and need to be replaced, which is a straightforward fix that takes just some minutes. Flip the fob upside down and you'll be able to see the tiny latch/release on the back. Replace the old battery by making sure it's on the bottom of the fob. Line up the two halves of the fob carefully.
The fob must be cleaned if it was exposed water before you can insert a new battery. It is possible to clean the fob with isopropyl or electronic cleaner and a paper towel. Then, let it dry completely prior to reinstalling the battery.
To start the car the key fob must also be connected to the car. This can be done according to the instructions in your owner's manual or by using an OBDII scan. The most likely reason why the key fob stopped functioning is because it was not connected to the car. A defective chip inside the fob can cause it to stop working however, this is a rare. A new receiver module may be needed in this case. If this is the case the receiver module will need to be replaced by an expert technician.
Water Damage
The key fobs are battery-operated and the batteries should be replaced every two years, or at the point that the car ceases to respond when you press the "start" switch. Keys have rubber seals to keep water out, but submerging the key fob into the ocean or in a pool could cause damage to the chip inside the. If this happens you'll need the replacement key from Nissan or locksmith.
If the key fob is equipped with an operating chip, it's likely that the computer has lost connection to it, and this could happen for any number of reasons. A simple restart of your car will fix this issue, but in the event that the key is showing the "Key ID" error message, you'll have to contact Nissan or an auto locksmith to get help.
The three most common reasons for this problem are dead key fob batteries as well as a key that is not programmed and a damaged or malfunctioning key fob that is damaged or faulty. The first two causes can be fixed fairly easily and the third one is more difficult to diagnose and repair however, it can be fixed with patience. Compare Nissan Key Replacement prices near you with WhoCanFixMyCar and then book your repair online. You can read reviews of local Nissan dealerships, Nissan mechanics, and garages in just a few seconds.
Faulty Chip
The key fob of your Nissan Juke has a special chip that transmits an electronic signal to the car when you turn it. The key may be inoperable if the chip is faulty. If this is the case, the problem will only be resolved by replacing the key. The Nissan Juke key may be damaged due to several reasons, including water damage or an inactive coin-battery.
If your key fob stops working after washing it or even a bath, you should check the chip for damage from water. Check that the retaining clips are tight and the chip isn't exposed to water. If you see any signs of water damage, consider removing the battery, then wiping the electronic component with isopropyl ethanol or electronic cleaner.
If the chip is defective You will need to visit your local locksmith or dealer. They will require the year model, make, and year of your vehicle in order to locate an alternative. You will also have to write down your VIN (Vehicle ID Number) so that the dealer, or locksmith knows the key you have. This will enable them to check the correct key code, and ensure they are cutting the correct key.
Faulty Receiver Module
The key fob sends a radio frequency signal to your car in order to perform several functions. It can unlock the trunk as you hurry to the car with your groceries or start your car by pressing the button on the fob. It can also open your windows and turn the horn on in the event that you lock the keys inside your car.
If the key fob ceases functioning, there could be an issue with the receiver module within the vehicle. The receiver modules are tuned so that they can receive specific frequencies which correspond to the signals sent by Nissan key fobs. If your car has an inoperable receiver module it will not respond to any signal sent by the key fob.
It is always an excellent idea to have a spare Nissan key fob in the event that your original key gets lost or breaks. A locksmith or a dealership can program the spare key to work with your Nissan. This will allow you to avoid the hassle of losing your keys or locking them inside your car.
If your Nissan Juke key fob has been exposed to pure rain or tap water it is possible to have the issue solved by cleaning it using isopropyl alcohol or electronic cleaner. If the chip is fried and you need to purchase a replacement key fob, which can be encoded to your car by a locksmith dealer.